PATENTED
New Product : TAMPER PROOF SECURITY DEVICE FOR REVOLVERS AND SEMI-AUTOMATIC WEAPONS
Registered Trademark: TRI-BEST
Inventor: Phillip M. Arreguin
U.S. Patents 5,488,794 & 5,732,498
Foreign Patents Canadian - 2,174,065 & 2,152,571
U.S. Trademark 2,086,210
- Please Note: Retail tools can breakoff certified gunlocks
- Pre-Preventive Design From Shipping Employees Access To Stolen Weapons From Packages During Shipments
- All internal, not externally designed
- Corporate Representative Available (project)
- Marketable applications, Military, Law-Enforcement, Civilian, Security
- Project supercedes Canadian Legislative Mandate of Firearms Safety Legislation
- Surpasses all gunlock designs/standards(MIL-STDS)-(882-D Dept. of Defense Standards)
- 100% multi-state (50) Product Acceptance (intrastate,interstate)
- Serious Requests(with validation) will be responded to.
- MANUFACTURER (U.S.) AVAILABLE (foreign off-shore)
- MULTIPLE "PROTOTYPES" DEMO ON VIDEO VHS-CD ROM FORMATS
- MANAGEMENT + MARKETING PROF. TEAM (CORP) US.FOREIGN, AVAILABLE
- DISTRIBUTORS/WHOLESALERS MAJOR INTERESTS (FIREARMS TRADE INDUSTRY)
- INVESTOR TO UNDERWRITE ENTIRE BUSINESS PROJECT
- MULTIPLE REFERENCES AND ENDORSEMENTS AVAILABLE
- MULTIPLE EXTENSIVE RESEARCH IN TRADE INDUSTRY (SIX MARKETING SETS), MAIL-ORDER CATALOG ADVERTORIALS, INFOPRINTS ETC.
- MARKETING STUDIES (INFORMERCIAL TV AND RADIO)-A.M.G. (MEDIA)
- FOR CONSUMERS WANTS NEEDS USES (PRODUCT PERFORMANCE)
- PROJECT SUPERCEDES ALL FEDERAL AND STATE PASSED LEGISLATION PAST, PRESENT AND FUTURE HR515, HR499,S.247,AB106/AB 1219-CA/SB.130(CA), ETC.
- MULTIPLE MAJOR PRODUCTS IN 1 + ACCESSORIES
- INVESTOR REPRESENTATIVE AVAILABLE, (TO ANSWER ALL QUESTIONS)
- ONE DAY TO BE MANDATED BY CONGRESS (TO BE A STANDARD) IN THE FIREARMS INDUSTRY
- AN ALTERNATIVE TO MANUFACTURERS CERTIFIED FSD'S THAT CAN BE TAKEN OFF BY STANDARD TOOLS BY TEENS AND CHILDREN
- DESIGN SUPERCEDES ALL FEDERAL EXISTING/PROPOSED STANDARDS: F883-.97, ANSI/STDS, ASTM/STDS,F-15.53
- ANTI-TERRORISM PRODUCT DESIGN FOR FIREARMS
Semi-auto & Revolver S/D-actions:
Secures the entire firearm and is specifically designed for each make, model, caliber, design, size, variations, etc. Very low to zero liability to end user. Low maintenance product design.
Semi-auto are secured at ejection port area, flange area, barrel, rearend position of slide, slide pin, magazine, magazine release, buffer at front of firearm.
Revolvers are secured at cylinder, trigger, hammer, muzzle, barrel, cylinder release and cylinder ejection rod. (note: will not interfere with the operation of firearm)
Tri-Best System consists of the following:
Finally, a patented safety device which is child proof and tamper resistant has become available which will eliminate unnecessary injuries and deaths which occur as a result of accidental shooting and intentional shooting with stolen weapons, used in school shootings, and self-inflicted wounds caused by certified FSD gunlocks still can be taken off with household tools, also by faulty certified gun locks designs etc.
The patented TAMPER PROOF SECURITY DEVICE will render a gun inoperable until a conscious effort and special tool is used to remove the gun lock. The lock works with all types of firearms, such as 45 caliber, 9 mm, assault type weapons, Uzi , shot guns, revolvers, pump/lever/bolt/slide action, and M 16. Two designs are available, depending on the type of weapon used:
- Revolver -
Tri-Best secures the cylinder trigger, hammer, muzzle, barrel and cylinder release- ON-OFF Access 1-2 seconds
Consists of a two piece locking assembly, whereby a dummy cartridge assembly is inserted into the revolver's cylinder and a keeper is inserted into the muzzle or barrel which locks the dummy cartridge assembly to the keeper. A special key coded locking tool is used to tighten the keeper, disabling the gun and making it impossible to fire.
- Automatic -
Consists of a contoured insert that is assembled into the ejection slot on the slide when the slide is in its most rearward position. The insert is recessed so that it will accept a contoured dummy round that is assembled to the clip so that when a keeper is inserted into the muzzle with an elongated rod, the keeper will fix the dummy round to the insert. A special key coded locking tool is then used to tighten the keeper. Accordingly, the weapon will be completely locked-up including the clip and the slide. For weapons that do not have clips, the dummy cartridge is eliminated and the keeper locks directly on to the contoured insert.
Additionally, the two piece locking assembly of the patented TAMPER PROOF SECURITY DEVICE is not visible from the exterior of the gun. Since the two piece locking assembly can only be removed by a special tool, it is almost impossible for an unauthorized person to remove the two piece locking assembly.
The patented TAMPER PROOF SECURITY DEVICE is multi-functional containing seven products in one. For example, it can act as a gun cleaner; a storage compartment for oil, currency or the like; a watertight compartment, a phillips head screwdriver and the key lock tool can be worn on a key ring or attached to a belt using the affixed belt clip.
This unique device is easy to use and provides the user with an effective and efficient means with which to
prevent a gun from being fired by an unauthorized user thereby eliminating accidental firing by a child who has accessed the revolver or in the event that the weapon is stolen.
Extensive research has been conducted, and endorsements of the TAMPER PROOF SECURITY DEVICE are available upon request.
Revolver Model
United States Patent No. 5,488,794
Canadian Patent No. 2,152,571
Figure 1: Special Locking Tool Is Inserted Into Muzzle
Figure 2: Two Piece Locking Assembly, Which Can Only Be Removed By A Special Tool
Figure 3: Dummy Cartridge, Keeper, and Securing Tool In Use
Click Here For More Drawings Of The Revolver Model
===================================================================
Semi-Automatic Model (pistols)
United States Patent No. 5,732,498
Canadian Patent No. 2,174,065
Figure 1: Pistol With Insert In Place and Dummy Cartridge Ready To Load
(secures internally)
Figure 2: M 16 Rifle With The Security System In Place
Click Here For More Drawings Of The Automatic Model
If you are interested in the above invention please contact the office of Michael I. Kroll as follows:
Michael I. Kroll
171 Stillwell Lane
Syosset, New York 11791
Tel. #: 800-367-7774
Tel. #: 516-367-7777
Fax #: 800-367-7704
Fax #: 516-692-2787
E-Mail patent@invention.net
A finders fee will be paid to qualified parties. Prototypes are available.
Click Here To Visit The Web Page of Michael Kroll, Patent Attorney
JUDICIAL WARNING: Any person who infringes on patent and trademark rights will be prosecuted to the full extent of the law.